Instruction Manual
Table Of Contents
- 1. Handling Precautions
- 2. General
- 3. Features
- 4. Camera Installation
- 5. Name of each section and its function
- 6. Connections
- 7. Angle and Lens adjustment
- 8. Operating Procedure
- 9. Warranty and after-sale service
- 10. Specifications
- 11. External Appearance
- 12. Setup Flow Chart
- 1. Precauciones de manejo
- 2. Generalidades
- 3. Características
- 4. Instalación de la cámara
- 5. Nombre de cada sección y su función
- 6. Conexión
- 7. Ajuste de ángulo y objetivo
- 8. Procedimiento de operación
- 9. Garantía y servicio postventa
- 10. Especificaciones
- 11. External Appearance
- 12. Setup Flow Chart
E-7
7. Angle and Lens adjustment
7-1. Angle adjustment
Before doing this, the clear dome cover has to be
removed.
●
Remove the dome cover
Turn the black section of the dome cover in a
counterclockwise direction to remove.
Pay attention not to drop a dome cover while doing
this.
Note: When imaging in a horizontal direction, the
black section of the dome cover may be imaged
so that part of the image is missing. Adjust the
angle of vision in a horizontal direction so that
the dome cover is not imaged.
7-2. Vari-focal lens adjustment
To re-direct lens, loosen the lens fixing screws for elevation.
Adjust the zoom knob for framing and angle, and a focus knob for
focusing.
Using those two knobs, adjust the lens to have desired framing, angle
and focal point. Repeat this procedure a couple of times, so that you may
achieve the best result.
Once the desired settings have been achieved, tighten the screws to fix
the position.
Zoom knob
Focus knob