Instruction Manual
Table Of Contents
- 1. Handling Precautions
- 2. General
- 3. Features
- 4. Camera Installation
- 5. Name of each section and its function
- 6. Connections
- 7. Angle and Lens adjustment
- 8. Operating Procedure
- 9. Warranty and after-sale service
- 10. Specifications
- 11. External Appearance
- 12. Setup Flow Chart
- 1. Precauciones de manejo
- 2. Generalidades
- 3. Características
- 4. Instalación de la cámara
- 5. Nombre de cada sección y su función
- 6. Conexión
- 7. Ajuste de ángulo y objetivo
- 8. Procedimiento de operación
- 9. Garantía y servicio postventa
- 10. Especificaciones
- 11. External Appearance
- 12. Setup Flow Chart
E-6
6. Connections
Be sure not to apply power before making connections.
6-1. Power cable
Use DC12V (10.5V to 15V), or AC24V (± 10%) in both 60Hz and 50Hz.
* This installation should be made by a qualified service person and
should conform to all local codes.
6-2. Video output cable (BNC)
This is a video output terminal. To be use an ordinary video output, for
monitors, or switcher.
6-3. Test monitor output (MON.OUT)
• Image output terminal used when installing the camera.
• By using the accessory cable to connect to the VIDEO IN of the monitor
or the image input terminal, it is easier to carry out positioning and
focusing.