Instruction Manual

E-12
(3) DEFOG
It is used when the entire video looks foggy.
The LEVEL consists of LOW, MID, HIGH. Select one according to the
situation.
(4) CAMERA ID
The screen can display 26 characters x 2 lines.
①
OFF
②
ON
●
ID character setting
Pressing the E button while
CAMERA ID is ON opens the screen
on the right.
・
Alphabets, numeral figures, symbols
When the E button is pressed while
these items are selected, letters are
added to the ID.
・
Arrow
When the E button is pressed while an arrow is selected, the cursor
moves to the specified position.
・
CLR
It erases the characters selected with a cursor.
・
POS
It sets the CAMERA ID display position. Pressing URLD moves
the cursor up and down, and right and left. Pressing the E button
finalizes the condition.
(5) PRIVACY
The maximum of 16 channels can be
set for the privacy mask.
Setting mask color, intensity, and size
are available.
TOP and BUTTOM decide the vertical
range, and RIGHT and LEFT decides
the horizontal range.
①
AREA SEL
It decides the mask ch. to change the setting.
②
TOP
It decides the upper position of the privacy mask area.
③
BOTTOM
It decides the lower position of the privacy mask area.
④
LEFT
It decides the left side position of the privacy mask area.
ＣＡＭＥＲＡＩＤ
ＲＥＴＵＲＮ

↵
ＡＢＣＤＥＦＧＨＩＪＫＬＭＮＯＰＱＲＳＴＵＶ
ＷＸＹＺ０１２３４５６７８９−！♯＄％＆（
）＿，¥：；＜＝＞？＠＼＾＊．ｘ＋／
←→ ↑↓ＣＬＲＰＯＳ

↵
ＰＲＩＶＡＣＹ
ＡＲＥＡＳＥＬ １／１６
ＴＯＰ １６０
ＢＯＴＴＯＭ ３２０
ＬＥＦＴ ４００
ＲＩＧＨＴ ８００
ＣＯＬＯＲ １
ＴＲＡＮＳＰ ０．００
ＭＯＳＡＩＣ ＯＦＦ
ＲＥＴＵＲＮ

↵