Instruction Manual
Table Of Contents
- 1. Handling Precautions
- 2. General
- 3. Features
- 4. Name of each section and its function
- 5. Operating Procedure
- 6. Warranty and after-sale service
- 7. Specifications
- 8. External Appearance
- 9. Setup Flow Chart
- 1. Precauciones de manejo
- 2. Generalidades
- 3. Características
- 4. Nombre de cada sección y su función
- 5. Procedimiento de operación
- 6. Garantía y servicio postventa
- 7. Especificaciones
- 8. External Appearance
- 9. Setup Flow Chart
E-5
⑤
Video output terminal (VIDEO OUT)
To be used to give out the video signal. Connect this to the video input
terminal of a monitor, switcher etc. (To be terminated with 75-ohm
impedance.)
⑥
Power indicator (POWER)
The LED indicator stays on in green while the camera power is on.
⑦
DC12V/AC24V power input terminal
Keep the input power at DC10.5-15.0 V or AC24V±10%.
* This installation should be made by a qualified service person and
should conform to all local codes.
⑧
-
⑨
Camera setup function switches
PleaserefertotheOperationProcedurechapter.