Instruction Manual

(1) Image Sensor: 1/3-inch Pixim DPS CMOS sensor
(2) Pixel Number: Approx. 410,000 pixels,
758 (H) x 540 (V)
(3) Scanning system: NTCS: 525 TV lines / 59.94Hz ,
2 : 1 interlace
PAL: 625 TV lines / 50Hz ,
2 : 1 interlace
(4) Sync system: Internal synchronization (Crystal-lock)
(5) Video output: VBS 1.0Vp-p/75 ohms
(6) Resolution: Horizontal; 520 TV lines
(high-resolution mode 690TVL-Effective)
(7) S/N ratio: Over 50dB (p-p/rms)
(8)
Minimum object
illumination:
ISD-A14-25 ： 0.7Lx/F2.1
(S-UP OFF; VBS output: 50%)
ISD-A14-29 ： 0.6Lx/F2.0
(S-UP OFF; VBS output: 50%)
ISD-A14-36 ： 0.5Lx/F1.8
(S-UP OFF; VBS output: 50%)
(9) Day/Night switching: Digital Day/Night
Auto or Manual, Selectable
(10) Wide Dynamic Range: Built-in and Variable
(11) AGC: ON (AGC, HYPER-AGC)/
OFF (LOW, MID, HIGH)
(12) Electronic Sensitivity
Control: Built-in, On (AUTO) or Off Selectable
Maximum 32 times
(13) White Balance Control: ATW/ATWex/AWC/MANUAL,
Selectable
(14) DETAILED correction: Built-in
(15) Digital Noise Reduction: Built-in, On or OFF, Selectable
(DNR function)
(16) Color rolling reduction
function: Built-in, On or OFF, Selectable
(CRR function)
(17) Private Mask Setting: Built-in. Up to 8 areas
(18) Optimum Monitor
Output Selection:
Built-in, CRT or LCD types, Selectable
(19) Camera ID: 1 Line, up to 24 characters
(alphanumeric and symbols)
(20) Local set-up function : Selections and settings possible
on screen display
(The set-up unit (sold separately) is
required.)
Lens
mount
M12
M12
M12
Focal length
(f)
2.5mm
2.9mm
3.6mm
Maximum
aperture ratio(F)
2.1
2.0
1.8
View angle
(H)
113.4°
90.8°
63.0°
View angle
(V)
85.9°
64.7°
53.0°
5. Warranty and after-sale service
7. External Appearance
8. Setup Flow Chart
• Please consult Ikegami Electronics (U.S.A.) Inc. or your
dealer for full warranty information. Your dealer will
repair or replace free of charge within the warranty
period according to the warranty coverage.
• For repairs after the expiration of the warranty period,
consult your dealer or local salesperson. It will first be
judged whether the trouble is repairable or not. Charged
servicing will then be made upon request of the user.
• Before you ask for servicing, take trouble of reading the
Instruction Manual. If the unit still fails, take note of the
model number, date of purchase, problem, etc. in
detail, and inform your dealer or sales representative.
• If you have questions about the after-sale service,
contact your dealer or local salesperson.
* We suggest you ask for preventive inspection earlier.
6. Specifications
(21) Remote set-up function: Available (Multiple image
communication method by exclusive
remote controller (sold separately))
(22)
Operating Temperature
and Relative humidity: -10 to +50°C, RH 30% to 90%
(No Condensation)
(23) Lens mount: M12 mount
(24) Lens: M12 fixed focal lens
(f2.5mm/f2.9mm/f3.6mm)
(25)
Power Requirement: DC12V±10%
(26)
Power Consumption: 1.6W
(27)
Outer dimensions: 39.0(W)×39.0(H)×32.5(D) mm
(protrusion included)
(28) Weight: Approx. 80g
(29)
Input/output connectors: ・VIDEO OUT BNC
・DC12V DC jack
(Applicable plug: 5.5 mm dia.,
x 2.1 mm dia., Center Plus)
(30)
Supplied accessories: Instruction Manual, 1 Copy
Power/video integrated cable, 1 pc.
* Specifications and design are subject to change for product
improvements without notice.
TOP 3RD 4TH2ND
TOP 3RD 4TH2ND
UDERL UDERLUDERL UDERLUDERLUDERLUDERL
DC
MANUAL
SETUP MENU
SCENE NORMAL
INDOOR1
INDOOR2
OUTDOOR1
OUTDOOR2
CUSTOM
DAY/NIGHT AUTO SWITCHED LEVEL
RET
COLOR
B/W
MID
BRIGHT
DARK
+SET
CAMERA ID OFF
ID *ID EDIT
ID ALL CLEAR
ID POSITION
*ID ALL CLEAR
TOP
BOTTOM
ON
+SET
+SET
+SET
RET
W.DYNAMIC
*ADJUST
IRIS LEVEL *ADJUST
+SET
1SPOT
+SET
+SET
RET
+SET
SENS UP ON SLOW SHUTTER
RET
OFF
X2
X4
X8
X16
X32
+SET
+SET
LIGHT CONTROL BACKLIGHT COMP. OFF
ON
+SET
+SET
ADJUST ZONE
+SET
RET
+SET
RET
*SPOT ZONE
+SET
2SPOT
+SET
ADJUST ZONE-1
+SET
ADJUST ZONE-2
+SET
RET
*SPOT ZONE
*SPOT ZONE
GAIN
HIGH
LOW
MID
LOW
MID
HIGH
AGC AGC MAX GAIN
HYP-AGC
LENS IRIS
+Up Right Down Left Up Down Set
+Up Right Down Left Up Down Set
+Up Right Down Left Up Down Set
+SET
+SET
*ADJUST
*ADJUST
*ADJUST
*ADJUST
*COLOR BAR ON/OFF
+SET
RET
+SET
RET
+SET
RET
WHITE BALANCE
ATW
ATW Ex
SYNC
INT
MENU LOCK
OFF
AWC PUSH *AUTO ADJUST
ON
MANUAL R GAIN
B GAIN
+SET +SET+SET
+SET
RET
+SET
EXIT
*SAVE AND EXIT
+SET
CANCEL
*BACK TO PREVIOUS SETTING
+SET
RESET
*BACK TO FACTORY SETTING
+SET
+SET
+SET
VIDEO STANDARD
COLOR BAR
*ADJUSTCHROMA
*ADJUST VIDEO LEV.
*ADJUSTDETAIL
7.5 IRE
0 IRE
PEDESTAL
ON
OFF
DNR
OFF
ON
CRR
NORMAL
HIGH
RESOLUTION
OFF
ON
PROGRES. SCAN
PRIVACY MASK
PAI NT
ON
OFF
MASK1~
MASK8
ON
OFF
GRAY
BLACK
WHITE
PRIVACY MASK
CRT
LCD
MONITOR
VIDEO STANDARD NTSC
PAL
SIZE
POSITION
+SET
RET
+SET
ZOOM
PAN
*ADJUST
TILT
OFF
X2
X4
X8
DIGITAL ZOOM
OFF
BOTH
HORIZ
VERT
VIDEO FLIP
PUSH SET
FOR A WHILE
39.0
24.2
15.88.4
39.0
4.0
52.7
3-ø3.2
12.0
41.6
24.0
5.9