Manual

Below is explanation for setup done screens e.g.
○
Condition1:
The recording is done by
every Saturday and Sunday of week.
And it is controlled Schedule setup
contents and Event occurred.
○
Time(hh:mm):
In this case, not setup it,
this means all day 24hours scheduled.
○
Week（Days）):
In this case, not setup it,
this means all week scheduled.
○
Date（mm/dd）
In this case, not setup it,
this means all months scheduled.
○
When it is clicked Save button, then
below Recording Configuration Screen
is displayed. It can be confirmed the
setup results of Recording Condition.
○If click Back button, new setting data
will be cancelled and the screen will be
back to previous screen display.
○
When it is clicked Save button on
above
Condition1
, Recording
Configuration Screen is displayed as
right screen.
○
Condition1:
This field shows ,SUN,SAT
schedule recording, and M1(Motion
Detect 1), D1(Alarm Sensor 1) Event
recording setting.
Also this setting condition is shown
graphically on table of 24hours/Weekly.
○
when it is needed to record, to select
Enable
radio button of
Recording
Service
. If not, select
Disable
redio
button.
○
Pre-Alarm
and
Post-Alarm
fields can
be set recording conditions for before
and after of Event.
The detail is referred to
8-2-3.Pre-Alarm & Post-Alarm Configuration Example.
56