Manual

Service
This shows what service is for this condition.
Module ID Module ID for current setup. (Fixed 0)
Camera ID
Camera ID for current setup.
Enable / Disable
Enable:To use this condition
Disable:Not to use this condition
Select
Mode
Always
Recording is enabled all the time.
It is not able to set Schedule and Event .mode.
Schedule Only Recording is done by setup schedule.
Event Only
Recording is controlled by Event setting condition.
(e.g. Sensor Input, Motion Detection)
Schedule and Event Recording is controlled by both Schedule and Event.
Schedule
Week
Set the day of week for Recording.
If Week is not set, it is taken all week.
Time
Set the Time of day for Recording.
If Time is not set, it is taken 24 hours day.
Date
Set the date(month/day) for Recording.
If Date is not set, it is taken all the months.
Event
Alarm Sensor
Each of 1,2 refers to the Stream
number, and checked when
Event driven recording is selected.
If two sensors are checked together, recording is enabled
only when two sensors are activated.
(IPD-BX11,IPD-DM11,IPD-VR11 are functioned with Alarm
Sensor number 1 and 2 only)
Motion Detection
Each of 1,2 refers to the Stream number, and checked when
Motion Detection recording is selected.
If two sensors are checked together, recording is enabled
only when two sensors are activated.
(IPD-BX11,IPD-DM11,IPD-VR11 are functioned with
Sensor number 1 and 2 only)
When this function is need to use, before it should be set up
the
6-3-3.Motion Detection
.
Camera Connected No functioned for IPD-BX11,IPD-DM11,IPD-VR11)
Camera
Disconnected
No functioned for IPD-BX11,IPD-DM11,IPD-VR11)
55