Manual

8-2-1.Camera
Click
Camera1, Camera2
item on Menu, below setup screen is displayed.
Condition 1~4
Set up screen is displayed as 8-2-2. Condition 1.
Recording condition
tablefor 24hours weekly
Graphic displays recording condition (Always, Schedule, Schedule &
Event) on table of time and days of week.
Recording Service
Enable:To use this record function.
Disable:Not to use this record function.
Server Module ID Fixed 0
Camera Number
1:Camera1 Primary Stream.
2:Camera1 Secondary Stream.
Camera Name
It shows entered Camera name Up to 31 alphanumeric characters or
up to 15 Unicode.
Pre-Alarm Images
Set the image frames up to 5 frames to record before Event occurs.
Valid only for set Event mode recoding.
Pre-Alarm Speed
Set the recording
speed before Event between 0.1f/s to 10.0f/s, and
Fastest. Valid only for set Always or Schedule mode recording.
Post-Alarm Images
Set the image frames up to 5 frames to record after Event.
Valid only for set Event mode recoding.
Post-Recording Speed
Set
the recording speed after Event between 0.1f/s to 10.0f/s, and
Fastest. Valid only for set Event mode recording.
53