Manual

7-5.Sensor Notification
It is possible to setup the Sensor Notification parameters.
7-5-1.Sensor Notification
Click
Sensor Notification
item on Menu, below setup screen is displayed.
Input 1, Input 2 Setup screen for
7-5-2.Input
is dispalyed.
Service
Enable:To use Sensor Notification service
Disable:Not to use Sensor Notification service
Service Mode Select network mode for CGI between HTT P, T C P a n d U D P.
Main IP address Enter IP address to use in CGI or other functions.
Aux1 ~ Aux 3 IP address Enter 3 more addresses to use in CGI or other functions.
Port Enter the port number for CGI or other functions. Default: 80
CGI Path or
Alarm Common Message
Enter the CGI Path or message for other functions.
User ID Enter User ID to log in.
Password Enter the Password to log in.
After finished above setting, click Save button to apply the setting data.
If click Back button, new setting data will be cancelled and the screen will be back to previous
screen display.
44