Manual

6-3-1.Camera & Motion
Click
Camera & Motion
on Menu, below configuration for camera menu is displayed
.
Default Video Format Select NTSC or PAL Video System for camera video
Video with Flexible
Extra System data
Video with Flexible Extra data is sent from COM port
(This function is not implemented)
Video with
user defined message
User defined message with Video data is sent
(This function is not supported)
Video with PPP status
PPP(Configuration status)data with Video data is sent
(This function is not supported)
Video with camera name Camera name with Video data is sent (This function is not supported)
Video with server name
Sever address with Video data is sent (This function is not supported)
Video with IP address
IP address with Video data is sent (This function is not supported)
Audio
Audio function is to be used(Applies Primary stream of IPD-DM11,
IPD-
VR11 only),it can be streamed to PC and Audio out from PC
speaker.
Frame Rate
Set the frame numbers for Primary Stream, the Secondary Stream
numbers shall be under the Primary Stream fame numbers.
（setting value:1fps, 2 fps, 3 fps, 5 fps, 10 fps, 15 fps, 30 fps）
Image Size
Select the encode size for Primary Stream and Secondary Stream
（setting value:160x112/160x144, 320x240/320x288,
640x480/640x576,704x480/704x576, 720x480/720x576）
Encoding Standard
Select the compression method either M-JPEG or H.264 for Primary
Stream and Secondary Stream.
After finished above setup, click Apply button to save settings.
If click Back button, new setting data will be cancelled and the screen will be back to previous
screen.
28