Manual

5-5.Network Status Notification
Click
Network Status Notification
item, below menu and screen is displayed.
If any changes happen for network status, it is sent the update network status information to
registered email address. This function will work under DHCP or PPPoE.
After finished above setting, click Apply button to save settings.
The working conditions of this function are as follows
○
5-6.IP-CCTV DNS Setup
has been done.
○
5-1-2.DHCP Client
Setup has been done, and the camera has been given new IP address.
○
5-1-3.PPPoE
Setup has been done, and the camera has been given new IP address by ISP or
PPP server.
Mail Notification Enable : Send email
Disable : Do not send email
SMTP Server
SMTP Sever Address for email service
Authentication Login Enable : User ID and Password are required
Disable : Not required
User ID
User ID for SMPT server
Password Password for SMPT Server
Sender
Email Address of Sender
1st～ 3rd Recipient
Email Address of Recipients(up to 3 persons)
User Defined Message
Message is included in Notification email
This function is not supported
21