ICD-525KIT-ID2

ICDICDͲͲ525(NTSC)525(NTSC)
HighResolutionWideDynamicRangeCamera
Specifications
Image Sensor
1/3" CCD
Effective Pixels
NTSC : Approx.480,000 pixels, Effective 976(H) x 494(V)
Scanning System
NTSC : 525 lines at 59.94Hz, 2:1 interlace
Synchronization System
Internal Crystal Lock/Line Lock
Video Output
VBS 1.0Vp-p/75ȍ
Horizontal Resolution
700 TV Lines or better (High Resolution mode, by Rated Illumination)
S/N Ratio
52dB or better (p-p/rms)
Minimum Illumination (AGC ON)
Electronic Sensitivity Up OFF, VBS Output 50 IRE: 0.22lx/F1.2
Electronic Sensitivity Up 32 times, VBS Output 50 IRE): 0.007lx/F1.2
Day/Night Function
Built-in, Auto/Manual selectable
ICD-525 : Digital Day/Night
Digital Wide Dynamic Range
Built-in, LOW/MIDLOW/MIDDLE/MIDHIGH/HIGH selectable
AGC (Automatic Gain Control)
OFF/LOW/MIDLOW/MIDDLE/MIDHIGH/HIGH selectable
Electronic Sensitivity Up
Built in ON (AUTO)/OFF selectable(Up to 32 times)
Electronic SensitivityUp
Built
-
in
,
ON
(AUTO)/OFF
selectable(Up
to
32
times)
White Balance
ATW(Automatic Tracking White Balance)/AWC(Automatic White Balance Control)/
MANUAL selectable
Detail Correction
Built-in (Sharpness)
Digital Noise Reduction
Built-in, ON/OFF selectable (DNR Function)
AES(Automatic Electronic Shutter)
Built-in
Privacy Masking
Built-in (Maximum 15 zones)
Flip Function
Built-in, OFF/V-FLIP/H-FLIP/HV-FLIP selectable
Motion Detection
Built-in, ON/OFF selectable
Digital Zoom
Built-in, ON/OFF selectable(Up to 32 times)
Focus EZ
Built-in
Stabilizer Function
Built-in
Monitor Output Selection
CRT/LCD selectable
Camera ID
Up to 52 characters (alphanumeric and symbols)
Lens Mount
CS Mount (C mount adapter can be used)
Flange Back Adjustment Mechanism
Built-in
Power Requirement
AC24V±10%, 60Hz / DC12(10.5
㹼
15V)
Power Consumption
AC24V Approx.3W
DC12V Approx.3W
Operating Ambient Temperate
-10
Ԩ
㹼
+50
Ԩ
Operating Ambient Humidity
30%
㹼
90% RH (non-condensing)
Camera Mount
1/4" -20UNC (Bottom or Top)
External Dimensions
W60 X H58 X D70mm (without projection)
Weight
AC24V / DC12V Approx.240g
Input/ Output Connectors
VIDEO OUT -- BNC
AC24V / DC12V Input -- 2P
Standard Accessories
Power Input Connector, Instruction Manual,
Hex Wrench(for adjusting flange back)
DesignandspecificationsaresubjecttoChangewithoutnotice.
IKEGAMI ELECTRONICS, (U.S.A.) INC.
IKEGAMI
ELECTRONICS,
(U.S.A.)
INC.
URL: http://www.ikegami.com email: [e-mail]
Headquarters 37 Brook Avenue, Maywood, NJ 07607 Phone [phone] Fax [phone]
West Coast Redondo Beach, CA 90278 Ph [phone] Fax [phone]
South West Waxahachie, TX 75167 Ph [phone] Fax [phone]
South East Deerfield Beach, FL 33441 Ph [phone] Fax [phone]
Midwest Bloomingdale, IL 60108 Ph (603)-372-8777 Fax [phone]