User Manual
Table Of Contents
- Dishwasher
- en
- Table of contents
- Safety
- Preventing material damage
- Environmental protection and saving energy
- Installation and connection
- Familiarising yourself with your appliance
- Programmes
- Additional functions
- Features
- Before using for the first time
- Water softening system
- Rinse aid system
- Detergent
- Tableware
- Basic operation
- Basic settings
- Cleaning and servicing
- Troubleshooting
- Transportation, storage and disposal
- Technical specifications
- IKEA guarantee
- After-sales service
56
FAULT CAUSE TROUBLESHOOTING
Appliance stops during
the programme or cuts
out.
● Arrange the tableware so
that no parts project beyond
the basket and prevent the
appliance door from closing
properly.
Mechanical damage
FAULT CAUSE TROUBLESHOOTING
Appliance door cannot
be closed.
Door lock has been ac-
tivated.
● Close the appliance door
with greater force.
Door cannot be closed
due to installation
method.
● Check whether the appliance
has been installed properly.
When closed, the appliance
door, its decor or attached
parts should not knock
against adjacent cabinets or
the worktop.
Lid on the detergent
dispenser cannot be
closed.
Detergent dispenser or
lid are blocked by
sticky detergent
residue.
● Remove detergent residue.
Noise
FAULT CAUSE TROUBLESHOOTING
Filling valves making
knocking noises.
Caused by the do-
mestic installation. No
appliance fault
present. Does not af-
fect functioning of the
appliance.
● Can only be remedied in the
domestic installation.
Knocking or rattling
noise.
Spray arm is striking
tableware.
● Arrange tableware so that
the spray arms do not strike
tableware.
With a small load the
water jets directly
strike against the tub.
● Distribute the tableware
evenly.
● Load the appliance with
more tableware.