User Manual
Table Of Contents
- Dishwasher
- en
- Table of contents
- Safety
- Preventing material damage
- Environmental protection and saving energy
- Installation and connection
- Familiarising yourself with your appliance
- Programmes
- Additional functions
- Features
- Before using for the first time
- Water softening system
- Rinse aid system
- Detergent
- Tableware
- Basic operation
- Basic settings
- Cleaning and servicing
- Troubleshooting
- Transportation, storage and disposal
- Technical specifications
- IKEA guarantee
- After-sales service
55
Malfunctions
FAULT CAUSE TROUBLESHOOTING
Water is left in the ap-
pliance at the end of
the programme.
Filter system or area
under the filters is
blocked.
1. Clean the "Filters" →Page41.
2. Clean the "Wastewater
pump" →Page58.
Programme has not
yet ended.
● Wait until the programme
ends or cancel the pro-
gramme with reset.
● →"Terminate programme",
Page36
Appliance cannot be
switched on or oper-
ated.
Appliance functions
have failed.
1. Pull out the mains plug or
switch off the fuse.
2. Wait at least 2minutes.
3. Connect the appliance to the
power supply.
4. Switch the appliance on.
Appliance does not
start.
The mains fuse has
tripped.
● Check the relevant fuse.
Mains cable is not in-
serted.
1. Check whether the socket
works.
2. Check whether the mains
cable is properly inserted in
the socket and on the rear of
the appliance.
Appliance door is not
closed properly.
● Close the appliance door.
Programme starts
automatically.
You did not wait until
programme ended.
● →"Terminate programme",
Page36
Appliance stops during
the programme or cuts
out.
Appliance door is not
closed properly.
● Close the appliance door.
Power and/or water
supply has been inter-
rupted.
1. Check the power supply.
2. Check the water supply.
Top basket is pressing
against inner door and
preventing appliance
door from being closed
securely.
● Check whether the rear
panel of the appliance is be-
ing pressed in by a socket or
hose holder that has not
been removed.