User Manual
Table Of Contents
- Dishwasher
- en
- Table of contents
- Safety
- Preventing material damage
- Environmental protection and saving energy
- Installation and connection
- Familiarising yourself with your appliance
- Programmes
- Additional functions
- Features
- Before using for the first time
- Water softening system
- Rinse aid system
- Detergent
- Tableware
- Basic operation
- Basic settings
- Cleaning and servicing
- Troubleshooting
- Transportation, storage and disposal
- Technical specifications
- IKEA guarantee
- After-sales service
46
FAULT CAUSE TROUBLESHOOTING
E:25 lights up. Cover of the wastewa-
ter pump is loose
● Secure the cover of the
"Wastewater pump "
→Page58 so it clicks into
position.
E:27 lights up. Mains voltage is too
low.
This is not a fault on the appli-
ance.
1. Contact an electrician.
2. Have the mains voltage and
electrical installation
checked by an electrician.
Another error code ap-
pears on the display.
E:01 to E:30
A technical fault is
present.
1.
Press .
2. Unplug the appliance or
switch off the fuse.
3. Wait at least 2minutes.
4. Insert the mains plug of the
appliance in a socket or
switch on the fuse.
5. Switch the appliance on.
6. If the problem occurs again:
● Press .
● Turn off the water tap.
● Pull out the mains plug.
● Contact Customer Ser-
vice and give the error
code.
Washing results
FAULT CAUSE TROUBLESHOOTING
Tableware is not dry. No rinse aid used or
dosage set too low.
1. Add "Rinse aid" →Page29.
2. Set the amount of rinse aid
to be dispensed.
Programme or pro-
gramme option has no
drying phase, or the
drying phase is too
brief.
● Select a programme with
drying, e.g. intensive, strong
or ECO programme.
Some option buttons de-
crease the drying result, e.g
varioSpeed.