User Manual

43
Troubleshooting
Troubleshooting
Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting
information before contacting after-sales service. This will avoid unnecessary costs.
WARNING
Risk of electric shock!
● Incorrect repairs are dangerous.
●
Repairs to the appliance should only be carried out by trained specialist staff.
●
Only use genuine spare parts when repairing the appliance.
●
If the power cord of this appliance is damaged, it must be replaced with a special
connection cable, which is available from the manufacturer or his Customer Ser-
vice.
Appliance safety
FAULT CAUSE TROUBLESHOOTING
Appliance door does
not open at the end of
the Eco 50° pro-
gramme.
Eco drying is deactiv-
ated.
● Activate Eco drying.
Eco 50° programme
not selected.
● Select the Eco 50° pro-
gramme.
Additional function se-
lected.
● Deselect the additional func-
tion.
Extra Dry/Intensive
drying is activated.
● Deactivate Extra Dry/Intens-
ive drying.
→"Overview of basic settings",
Page38
Door is not correctly
adjusted.
● Adjust the appliance door as
described in the installation
instructions.
The door gap must be at
least 70mm - 100mm.
Appliance door and
door seal are soiled.
● Clean the appliance door
and door seal with a damp
cloth and a little washing-up
liquid.
Wrong screws used to
adjust the door gap.
● Use size 4X30 screws to ad-
just the door gap.
The screws are included in
the scope of supply.