User Manual

36
for this type of tableware and evid-
ences conformity with the EU Eco-
design Directive.
If you do not perform any actions on
the appliance for 15 minutes, the ap-
pliance will automatically switch off.
Setting a programme
To adjust the wash cycle to the soiling
level of the tableware, select a suitable
programme.
● Press the right programme button.
a The programme is set and the pro-
gramme button flashes.
Setting additional functions
You can set additional functions to com-
plete the washing programme selected.
Note:The additional functions which
can be used depend on the programme
selected.
● Press the button for the relevant ad-
ditional function.
a The additional function is set and the
additional function button flashes.
Setting timer programming
You can delay the start of the pro-
gramme by up to 24hours.
1.
Press ⁠.
a "h:01" appears in the display.
2.
Use or to set the required start
time for the programme.
3.
Press ⁠.
a This activates timer programming.
Tip:To deactivate timer programming,
press or repeatedly until "h:00"
appears in the display.
Starting the programme
●
Press .
a The programme has ended when the
display shows "0:00".
Notes
● If you want to add more tableware
while the appliance is running, do
not use the tablet collecting tray as a
handle for the top basket. You might
touch the partially dissolved tablet.
● You can only change a programme
when running if you cancel it.
→"Terminate programme", Page36
● The appliance switches off automat-
ically 1minute after the end of the
programme to save energy. If you
open the appliance door immediately
after the programme has ended, the
appliance will switch off after 4
seconds.
Interrupting programme
Note:When you open the appliance
door once the appliance has heated up,
leave the door slightly ajar for a few
minutes and then close it. This will help
prevent excess pressure building up in
the appliance and stop the appliance
door bursting open.
1.
Press ⁠.
a The programme is saved and the ap-
pliance switches off.
2.
Press to resume the programme.
Terminate programme
To end a programme early or to switch
from a programme that has already
started, you will need to cancel it first.
1. Open the appliance door.
2.
Press for approx.
3seconds.