User Manual

15
Drinking water connection
Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note
● If you are replacing the appliance,
you must use a new water supply
hose.
1. Consult the installation instructions
supplied for the steps required here.
2. Connect the appliance to the drink-
ing water connection using the en-
closed parts.
Observe the Technical data.
3. When doing so, check that the drink-
ing water connection is not kinked,
crushed or twisted.
Electrical connection
Connect your appliance to the power
supply.
Connecting the appliance to the
electricity supply
Notes
● Follow the "Safety instructions"
→Page6.
● Connect the appliance to alternating
current only, in the range of 220 -
240V and 50Hz or 60Hz.
● Please note that the water safety sys-
tem is only functional if there is a
power supply.
1. Insert the non-heating appliance
plug of the power cable into the ap-
pliance.
2. Insert the mains plug of the appli-
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
3. Check that the mains plug is inserted
properly.