User Manual
Table Of Contents
- Dishwasher
- en
- Table of contents
- Safety
- Preventing material damage
- Environmental protection and saving energy
- Installation and connection
- Familiarising yourself with your appliance
- Programmes
- Additional functions
- Features
- Before using for the first time
- Water softening system
- Rinse aid system
- Detergent
- Tableware
- Basic operation
- Basic settings
- Cleaning and servicing
- Troubleshooting
- Transportation, storage and disposal
- Technical specifications
- IKEA guarantee
- After-sales service
12
Preventing material damage
Preventing material damage
Preventing material damage
Safe installation
Follow the instructions when installing
the appliance.
ATTENTION!
● Improper installation of the appli-
ance may cause damage.
●
If the dishwasher is installed
above or below other domestic ap-
pliances, follow the information on
installation in combination with a
dishwasher in the installation in-
structions for the individual appli-
ances.
●
If there is no information or if the
installation instructions do not in-
clude the relevant information,
contact the manufacturer of these
appliances to check that the dish-
washer can be installed above or
below these appliances.
●
If no information is available from
the manufacturer, the dishwasher
should not be installed above or
below such appliances.
●
To ensure the safe operation of all
domestic appliances, continue fol-
lowing the installation instructions
for the dishwasher.
●
Do not install the dishwasher un-
der a hob.
●
Do not install the dishwasher near
heat sources, e.g. radiators, heat
storage tanks, ovens or other ap-
pliances that generate heat.
● Modified or damaged water hoses
may result in material damage and
damage to the appliance.
●
Never kink, crush, modify or cut
through water hoses.
●
Only use the water hoses supplied
with the appliance or genuine
spare hoses.
●
Never re-use water hoses that
have been used before.
● If the water pressure is too high or
too low, the appliance may not be
able to operate properly.
●
Make sure that the water pressure
in the water supply system is min.
50kPa (0.5bar) and max. 1000kPa
(10bar).
●
If the water pressure exceeds the
maximum value specified, a pres-
sure-reducing valve must be in-
stalled between the drinking water
connection and the hose set of the
appliance.
Safe use
Follow the instructions when using the
appliance.
ATTENTION!
● Escaping water vapour can damage
fitted units.
●
When the programme ends, leave
the appliance to cool down for a
while before opening the door.
● Special salt for dishwashers can dam-
age the tub due to corrosion.
●
To make sure that any special salt
that escapes is washed out of the
tub, add the special salt to the dis-
penser for special salt immediately
before the programme starts.
● Detergent may damage the water
softening system.
●
Only fill the dispenser of the water
softening system with special dish-
washer salt.
● Unsuitable cleaning agents may
damage the appliance.
●
Do not use a steam cleaner.