Operation Manual

ENGLISH 10
Points Control panel Display
1 Unplug and after 1 minute plug the appliance
again into the electrical socket, in the rst
60 seconds it is possible to set the required
power level.
Press for approximately 5 seconds
I
(Power
management step 1) button
The display related to the rst
and the second cooking zone
shows
2
Press the
C
button (Power management step
2) to conrm the previous step
The display shows last level set
previously
3
Press
E
- + button (Power management
step 3) to set the chosen level amongst the
different options available (2.5 – 4.0 – 6.0 –
7.2 kW).
The display related to the rst
and the second cooking zone
shows the set level.
4
Press the
C
button (Power management step
4) to conrm the previous step
The display related to the rst
and the second cooking zone
shows the set level which ashes
for approximately 2 seconds;
after which the hob emits an
acoustic signal and then turns
itself off; it is now ready for use
zones simultaneously, but without overload
problems.
4 maximum power levels are available and
showed on display: 2.5 – 4.0 – 6.0 – 7.2
kW (7.2 kW is considered as max power of
cooktop).
At the time of purchase, the hob is set to
maximum power.
After plugging the appliance into the
electrical socket, in the rst 60 seconds it is
possible to set the required power level by
running the following points: