User manual

Buttons
Button Function Description
MINUS To set the time.
CLOCK To set a clock function.
PLUS To set the time.
Heat-up indicator
When you activate an oven function, the
bars in the display
come on one by one.
The bars show that the oven temperature
increases or decreases.
Clock functions
Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day. Refer to "Set-
ting the time".
MINUTE MINDER Use to set a countdown time (maximum 23 h 59 min).
This function has no effect on the operation of the ap-
pliance. You can set the MINUTE MINDER at any time,
also if the appliance is off.
DURATION To set how long the appliance operates. Use only when
an oven function is set.
END To set when the appliance must deactivate. Use only
when an oven function is set. You can use Duration and
End at the same time (time delay), if the appliance is to
be activate and deactivate automatically later.
Press again and again to
switch between the clock
functions.
To confirm the settings of the
clock functions, press or wait 5
seconds for an automatic
confirmation.
Setting the DURATION or END function
during cooking function
1. Press again and again until the
display shows or .
or flashes in the display.
2. Press or to the set the values and
press to confirm.
ENGLISH 12