User manual

Additional functions
Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
If the Pyrolysis function operates,
the door is locked.
SAFE comes on in the display
when you turn a knob or press a
button.
1. Ensure the knob for the oven functions is
in the off position.
2. Press and hold
and at the same
time for 2 seconds.
An acoustic signal sounds. SAFE comes on in
the display.
To deactivate the Child Lock, repeat step 2.
Automatic switch-off
For safety reasons the appliance
deactivates automatically after some time if
an oven function operates and you do not
change any settings.
Temperature (°C) Switch-off time (h)
30 - 115 12.5
120 - 195 8.5
200 - 245 5.5
250 1.5
After an automatic switch-off, deactivate
the appliance fully. Then you can activate it
again.
The Automatic switch-off does
not work with the functions: core
temperature sensor, Duration,
End.
Residual heat indicator
When you deactivate the appliance, the
display shows the residual heat indicator
if the temperature in the oven is more than
40 °C. Turn the knob for the temperature
left or right to show the oven temperature.
Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
can continue to operate until the appliance
cools down.
Safety thermostat
Incorrect operation of the appliance or
defective components can cause dangerous
overheating. To prevent this, the oven has a
safety thermostat which interrupts the
power supply. The oven activates again
automatically when the temperature drops.
Hints and tips
General information
• Whenever preheating, remove the wire
shelves and trays from the cavity to have
the fastest performance.
• The appliance has five shelf positions.
Count the shelf positions from the bottom
of the appliance floor.
• The appliance has a special system
which circulates the air and constantly
ENGLISH 16