User manual

Clock functions
Clock functions table
Clock function Application
TIME OF DAY To set, change or check the time of day. Refer to "Set-
ting the time".
MINUTE MINDER Use to set a countdown time (maximum 23 h 59 min).
This function has no effect on the operation of the ap-
pliance. You can set the MINUTE MINDER at any time,
also if the appliance is off.
DURATION To set how long the appliance operates. Use only when
an oven function is set.
END To set when the appliance must deactivate. Use only
when an oven function is set. You can use Duration and
End at the same time (time delay), if the appliance is to
be activate and deactivate automatically later.
Press again and again to
switch between the clock
functions.
To confirm the settings of the
clock functions, press or wait 5
seconds for an automatic
confirmation.
Setting the DURATION or END function
during cooking function
1. Press again and again until the
display shows or .
or flashes in the display.
2. Press
or to the set the values and
press to confirm.
For Duration first you set the minutes
and then the hours, for End first you set
the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
or symbol and
time setting flash in the display. The oven
stops.
3. Press any button or open the oven door
to stop the acoustic signal.
If you press when you set the
hours for DURATION , the
appliance goes to setting of the
END function.
Setting the MINUTE MINDER
1.
Press
again and again until and
"00" flash in the display.
2. Press or to set the MINUTE
MINDER.
First you set the seconds, then the
minutes and then the hours.
At first, the time is calculated in minutes
and seconds. When the time you set is
longer than 60 minutes, the symbol
comes on in the display.
ENGLISH 13