User manual

If you set the MINUTE MINDER
when the DURATION or END
function operates, the symbol
comes on in the display.
Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates.
Press again and again until the display
shows time without clock symbols.
You cannot use the Count Up
Timer when the Duration or
End function operates.
Using the accessories
Warning! Refer to Safety
chapters.
Using the core temperature sensor
The core temperature sensor measures the
core temperature of the meat. When the
meat is at the set temperature, the
appliance deactivates.
There are two temperatures to be set:
• the oven temperature.
• the core temperature. Refer to the values
in the table.
Recommended core temperatures
50 °C Rare
60 °C Medium
70 °C Well done
Caution! Only use the core
temperature sensor supplied with
the appliance, or genuine
replacement parts.
1. Set the oven function and the oven
temperature.
2. Put the point of the core temperature
sensor into the centre of the meat.
3. Put the plug of the core temperature
sensor into the socket on the top of the
cavity.
Make sure that the core temperature
sensor stays in the meat and in the
socket during the cooking.
When you use the core temperature
sensor for the first time, the default core
temperature is 60 °C. While flashes,
you can use the knob for the
temperature to change the default core
temperature.
The display shows the symbol of the core
temperature sensor and the default
core temperature.
4. Press to save the new core
temperature, or wait 10 seconds for the
setting to be saved automatically.
ENGLISH
15