User manual

Clock function Application
END To set when the appliance deactivates. Use only when
an oven function is set.
TIME DELAY To combine DURATION and END function.
MINUTE MINDER Use to set a countdown time. This function has no effect
on the operation of the appliance. You can set the MI-
NUTE MINDER at any time, also if the appliance is off.
00:00 COUNT UP TIMER If you do not set any other clock function the COUNT UP
TIMER automatically monitor how long the appliance
operates. It is on immediately when the oven starts to
heat.
The Count Up Timer cannot be used with the functions:
DURATION, END.
Setting and changing the time
After the first connection to the mains, wait
until the display shows
and "12:00".
"12" flashes.
1. Press or to set the hours.
2. Press
to confirm and switch to set the
minutes.
The display shows and the set hour.
"00" flashes.
3. Press or to set the current minutes.
4. Press to confirm or the set time of
day will be saved automatically after 5
seconds.
The display shows the new time.
To change the time of day press again
and again until the indicator for the time of
day flashes in the display.
Setting the DURATION function during
cooking function
1. Press again and again until starts
to flash.
2. Press or to set the minutes and
then the hours for DURATION time.
Press to confirm.
When the time ends an acoustic signal
sounds for 2 minutes.
and time setting
flash in the display. The appliance
deactivates automatically.
3. Press any button to stop the acoustic
signal.
Setting the END function during cooking
function
1. Press again and again until starts
to flash.
2. Press or to set the hours and then
the minutes for END time. Press
to
confirm.
At the set time an acoustic signal sounds for
2 minutes. and time setting flash in the
display. The appliance deactivates
automatically.
3. Press any button to stop the acoustic
signal.
ENGLISH 12