User Manual

ENGLISH 10
Charcoalltermaintenance(ifthehoodis
installedinrecirculationmode)
1. Pull out the plug or disconnect the power
supply.
2. Remove the grease lter
3. If the carbon lters are already tted
(two lters that cover the protective
grilles for the motor impeller) and have
to be replaced, turn the central handle
anti-clockwise to unlock them.
4. Open the two lter shells
5. Pull out the two circular mats
6. Proceed in reverse order to t the new
lters.
7. Ret the grease lters.
Unlike traditional charcoal lters, this
charcoal lter can be washed and
reactivated.
With normal hood use, the lter should
be cleaned once a month. The best way
to clean the lter is in a dishwasher at
the highest temperature possible, using
a normal dishwasher detergent. To avoid
particles of food or dirt settling on the
lter during washing and giving rise to
unpleasant smells, it is advisable to wash
the  lter on its own. After washing, dry the
lter in the oven at 100°C for 10 minutes to
reactivate it.The lter will retain its odour-
absorbing capacity for three years, after
which it will have to be replaced.
2x
Lampmaintenance
The hood is equipped with a lighting system
based on LED technology.
The LEDs guarantee an optimum lighting,
a duration up to 10 times as long as the
traditional lamps and allow to save 90%
electrical energy.
For replacement, contact the Authorized
Service Centre.