User manual

9 ENGLISH
What to do if...
PROBLEM POSSIBLE CAUSE SOLUTION
Appliance not stable. The appliance is not correctly installed.
Respect the Installation instruction enclosed
to the appliance.
Appliance is not in horizontal position. The appliance is not correctly installed.
Respect the Installation instruction enclosed
to the appliance.
Performance in terms of oil capture
arent satisfying.
Oil and grease on metal lters.
Respect the cleaning frequency of lters as
described in the user manual.
Appliance doesn't work. The appliance is not correctly connected.
Verify that the main cable is connected to
the motor group or the plug is connected
to the socket.
The lamp is not working. The lamp is not correctly xed.
Verify that the lamp is screwed properly to
the lampholder.
The lamp is not working. The lamp is faulty. Replace the lamp bulb.
If there is a fault, first try to find a solution to the
problem yourself. If you cannot find a solution
to the problem yourself, contact an authorized
service center.
If you operated the appliance wrongly, or the
installation was not carried out according to
the Assembly instructions, the visit from the After
Sales Service technician may not take place free
of charge, even during the warranty period.