User manual

Using the detergent
1 2
3
A
Put the detergent or
the multi-tablet in
compartment (A).
4
B
If the programme
has a prewash
phase, put a small
quantity of
detergent in
compartment (B).
5
When you use multi-tablets, that contain
salt and rinse aid, is not necessary to fill the
salt container and the rinse aid dispenser.
• Adjust the water softener to the lowest
level.
• Set the rinse aid dispenser to the lowest
position.
Setting and starting a programme
Starting a programme
1. Keep the appliance door ajar.
2. Press the on/off button to activate the
appliance. Make sure that the
appliance is in programme selection
mode.
3. Press the programme button repeatedly
until the indicator of the programme you
want to select starts flashing.
4. Close the appliance door to start the
programme.
Opening the door while the appliance
operates
Opening the door while a programme is
running stops the appliance. It may affect
the energy consumption and the
programme duration. After closing the door,
the appliance continues from the point of
interruption.
If the door is opened for more
than 30 seconds during the
drying phase, the running
programme ends. It does not
happen if the door is opened by
AutoOpen function.
Do not try to close the appliance
door within 2 minutes after
AutoOpen automatically opens
it, as this may cause damage to
the appliance.
If, afterwards, the door is closed
for another 3 minutes, the
running programme ends.
Cancelling the programme
Press and hold the programme button until
the appliance is in programme selection
mode.
ENGLISH
14