User Manual

8ENGLISH
Productdescription
1 Control Panel.
2 Grease lter.
3 Lighting unit.
Controlpanel
WARNING:
- Never use steam cleaning equipment.
- Disconnect the appliance from the power
supply.
IMPORTANT: do not use corrosive or
abrasive detergents. If any of these products
accidentally comes into contact with the
appliance, clean immediately with a damp
cloth.
• Clean the surfaces with a damp cloth. If it is
very dirty, add a few drops of washing up
detergent to the water. Finish off with a dry
cloth.
IMPORTANT: do not use abrasive sponges or
metallic scrapers or scourers. Over time, these
can ruin the surface.
• Use detergents specically designed for
Cleaningandmaintenance
A Light button.
The light button has two positions.
To switch on the lights: move the button to
the right.
B Extraction power selection button.
The extraction speed switch has different
settings, depending on the amount of
steam and fumes.
To increase the extraction power: move the
button to the right.
cleaning the appliance and follow the
manufacturer instructions.
IMPORTANT: clean the lters at least monthly
to remove any oil or grease residuals.
Tocleanthegreaselter
The metal grease lter has an unlimited life
and must be washed once a month by hand
or dishwasher at low temperature and with a
short cycle. With cleaning in a dishwasher the
grease lter may become dull; this does not
effect its ltering capacity.
Greaseltermaintenance:
1. Unplug the appliance or disconnect the
power supply.
2. Remove the grease lters: pull the spring
release handle, then remove the lter
downwards.
3
2
1
A
B