User manual

Programme Degree of soil
Type of load
Programme pha-
ses
Consumption values
1)
Duration
(min)
Energy
(kWh)
Water
(l)
65 °C
Normal soil
Crockery and
cutlery
• Prewash
• Wash 65 °C
• Rinses
• Dry
100 - 120 1.3 - 1.5 14 - 17
3)
Normal soil
Crockery and
cutlery
• Prewash
• Wash 50 °C
• Rinses
• Dry
129 0.77 11.6
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
2) This programme is indicated for heavy soil loading to get the sufficient cleaning results on pots and pans.
3) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with
normal soil. (This is the standard programme for test institutes).
Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
[e-mail]
In your request please include the product
number code (PNC) found on the rating
plate.
For any other questions regarding your
dishwasher please refer to the IKEA
guarantee chapter.
Settings
Programme selection mode and user
mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
While in user mode, you can configure the
appliance by changing the following
settings:
• Activation or deactivation of the acoustic
signal for the end of a programme.
As the appliance stores the saved
settings, there is no need to configure it
before every cycle.
Settings accessibility is not
available when the appliance is
operating.
How to set programme selection mode
The appliance is in programme selection
mode when the programme indicator
is blinking.
ENGLISH 10