User Manual

WIRELESS ON/OFF SWITCH FUNCTIONS
ON - Dim UP
Press to turn your IKEA Home smart product
on. Press and hold to dim up.
OFF - Dim DOWN
Press to turn your IKEA Home smart product
off. Press and hold to dim down.
Pairing: Add IKEA Home smart products to
your system. See instructions below.
ADDING DEVICES TO YOUR
WIRELESS ON/OFF SWITCH
When the wireless ON/OFF switch is sold together
with an IKEA Home smart product (in the same
package), they are already paired.
To add more products, just repeat the steps below:
Make sure that the main power is turned on.
1 Hold the ON/OFF switch close to the IKEA Home
smart device you want to add (no more than 5
cm away).
2 Press and hold the pairing button for at least 10
seconds, you can nd the pairing button under
the rear cover.
3 A red light will shine steadily on the ON/OFF
switch. On your IKEA Home smart device the
pairing indicator will begin to dim and ash one
time to indicate that it has been successfully
paired.
Up to 10 IKEA Home smart devices can be paired
with 1 ON/OFF switch.
Make sure to pair them one at a time. If the IKEA
Home smart products are close to each other,
disconnect those that have already been paired
from the main power.
FACTORY RESET YOUR DEVICE
For wireless ON/OFF switch:
Press the pairing button 4 times within 5 seconds.
CHANGING THE BATTERY
When the wireless ON/OFF switch is used
regularly and as intended, the battery will last for
approximately 2 years.
When it’s time to replace the battery, a red LED
indicator will ash when you toggle the ON/OFF
switch.
Open the rear cover, and replace the battery with a
new CR2032 battery.
4ENGLISH