User manual

9 ENGLISH
Replacing the lamps
Remove the snap-on lamp cover by levering it
from under the metal ring, supporting it with one
hand. Remove the halogen lamp from the lamp
holder by pulling gently. Replace the lamp with
a new one of the same type, making sure that
you insert the two pins properly into the housings
on the lamp holder. Replace the snap-on lamp
cover. 20 W - 12V halogen light. Connection
type: G4, Length 30mm.
[
Lamp Power (W) Socket Voltage (V) Dimension (mm) ILCOS Code
20 G4 12 33 x 9 HSG/C/UB-20-12-G4