User manual

The next letter flashes.
9. Do step 7 again as necessary.
10. Press and hold to save.
You can overwrite a memory position.
When the display shows the first free
memory position, touch or and press
to overwrite an existing programme.
You can change the name of a programme
in the menu: Edit Programme Name.
Activating the programme
1. Activate the appliance.
2. Select the menu: Favourite Programme.
3. Press
to confirm.
4. Select your favourite programme name.
5. Press to confirm.
Press to go directly to menu: Favourite
Programme.
Using the Child Lock
The Child Lock prevents an accidental
operation of the appliance.
If the Pyrolysis function operates,
the door locks automatically.
A message comes on in the
display when you touch a sensor
field.
1. Activate the appliance.
2. Touch
and at the same time until
the display shows a message.
To deactivate the Child Lock function repeat
step 2.
Function Lock
This function prevents an accidental change
of the heating function. You can activate it
only when the appliance operates.
1. Activate the appliance.
2. Set a heating function or setting.
3. Press again and again until the
display shows: Function Lock.
4. Press to confirm.
If the Pyrolysis function operates,
the door is locked and the
symbol of a key comes on in the
display.
To deactivate the function, press . The
display shows a message. Press again
and then to confirm.
When you deactivate the
appliance, the function also
deactivates.
Set + Go
The function lets you set a heating function
(or a programme) and use it later with one
press of a sensor field.
1. Activate the appliance.
2. Set a heating function.
3. Press
again and again until the
display shows: Duration.
4. Set the time.
5. Press again and again until the
display shows: Set + Go.
6. Press to confirm.
Press a sensor field (except for ) to start
the function: Set + Go. The set heating
function starts.
When the heating function ends, an acoustic
signal sounds.
• Function Lock is on when the
heating function operates.
• The menu: Basic Settings lets
you activate and deactivate
the function: Set + Go.
ENGLISH 21