Installation guide

Minimum Installation Clearances - continued
Below Counter Installation Below Built-in Cooktop Installation
(25 mm) |
i 3"
(76 mm)
See note
below.
ee
Se" | ae
(8 mm) t
{ Se"
t (8 mm)
A. Cutout floor
B. Cabinet, storage drawer, oven or warming drawer
C. Countertop
D. Built-in cooktop (non-vented)
NOTE: The bottom of the cooktop may be sunk into the counter and lower cabinet. The minimum 3" (7.6 cm) clearance must exist
below the lowest point of the cooktop, and there must be no interference between any part of the cooktop (including any gas fittings)
and the microwave oven.
Minimum Cutout Dimensions
NOTE: Depth dimension may be 21%" (55.2 cm) with non-flush Cutout Top View
receptacle only if the receptacle is located in upper right or upper
left corner. See “Cutout Top View.” A B c D
. : “oy
21%" (55.2 cm)*
26%" (66.7 omy I AT
“|
|
i
26,"
‘ i (66.7 cm)
22V2" (57.2 em) ——— >
'
i
281/20" (72.3 cm) __; Gs. om)
Vv
*With flush receptacle, or with non-flush receptacle located in
upper right or upper left corner of cutout.
“With non-flush receptacle.
A. Microwave oven
B. Non-flush receptacle
C. Flush receptacle
DIMENSION 24" (61.0 CM) 30" (76.2 CM) D. Non-flush receptacle located in upper right
INSTALLATION INSTALLATION or upper left corner
Width 222" (57.2 cm) 28'%2" (72.3 cm)
+ 1/32" (1 mm) + 1/16" (2 mm)
Height Min. 17%" (45.1 cm) for all installations
Depth 21%" (55.2 cm) with flush receptacle, or with
non-flush receptacle located in upper right or
upper left corner;
261%" (66.7 cm) with non-flush receptacle