User manual

Problem Possible cause Solution
The appliance does not op-
erate.
There is no voltage in the
mains socket.
Connect a different electrical
appliance to the mains socket.
Contact a qualified electrician.
The appliance is noisy. The appliance is not sup-
ported properly.
Check if the appliance stands
stable.
Audible or visual alarm is
on.
The cabinet has been re-
cently switched on or the
temperature is still too
high.
Refer to "Door Open Alarm".
Audible or visual alarm is
on.
The cabinet has been re-
cently switched on or the
temperature is still too
high.
Refer to "High Temperature
Alarm".
Audible or visual alarm is
on.
The door is left open. Close the door.
Audible or visual alarm is
on.
The temperature in the ap-
pliance is too high.
Contact a qualified electrician
or contact the nearest Author-
ised Service Centre.
A square symbol is shown
instead of numbers on the
temperature display.
Temperature sensor prob-
lem.
Contact the nearest Author-
ised Service Centre (the cool-
ing system will continue to
keep food products cold, but
temperature adjustment will
not be possible).
The lamp does not work. The lamp is in stand-by
mode.
Close and open the door.
The lamp does not work. The lamp is defective. Contact the nearest Author-
ised Service Centre.
The compressor operates
continually.
Temperature is set incor-
rectly.
Refer to "Operation" chapter.
The compressor operates
continually.
Many food products were
inserted at the same time.
Wait a few hours and then
check the temperature again.
The compressor operates
continually.
The room temperature is
too high.
Refer to climate class chart on
the rating plate.
ENGLISH 22