ENSEN
Installation must be performed in compliance with current local construction and plumbing regulations. If in doubt, contact a professional. Switch off main shut-off valve before changing mixer tap.
5 4 3 2 25 1 0 0 60˚C Max.
1 4 AA-2245953-1
2 Ø 34 - 37 mm Ø 1 3/8 - 1 1/2" 126907 121844 121845 121846 50 mm max. 2" max.
IMPORTANT! Do not tighten too hard: this can damage hoses/pipes and washers.
Before use: Unscrew the Aerator/Flow Guide and allow the water to run freely for a few minutes. Then screw the Aerator/Flow Guide back in place. Ensure that it is tight to prevent removal by hand. Check at regular intervals to make sure that the installation is not leaking. Low pressure 10004087 Pre-fitted High pressure Inlet supply hoses shall be installed where light is excluded. Water supplies shall be at reasonably balanced pressures from a common source (e.g.
4 00 11 8 AA-2245953-1
