Quick Start Guide

HOW TO OPERATE THE COOKTOP
USING THE GAS BURNERS
The following symbols are given near each knob on the front panel:
The minimum position is when the knob is turned fully anticlockwise. All the operating positions must be chosen
between the min. and max. positions, and never between max. and off.
AUTOMATIC ELECTRIC IGNITION
To light one of the burners, press the knob corresponding to the burner and turn it anticlockwise to Max. Keep the
knob pressed for automatic lighting of the burner. In case of a power failure or no current, the burner can also be lit
with a match.
APPLIANCES WITH SAFETY VALVE
To light the burners, carry out the same operations given above. In this case, however, once the knobs are turned to
the opening position they must be kept pressed for about 10 seconds.
If for any reason the burner flame goes out, the safety valve automatically cuts in, shutting off the gas to the relevant
burner.
INJECTOR TABLE CATEGORIA II 2H3+
ELECTRICAL POWER SUPPLY: 230 V ~ 50 Hz
Disk full Tap closed
Large flame Max. opening
Small flame Min. opening
Type of gas used Type of
burner
Injector
marking
Rated heat
capacity
kW
Rated
consumption
Reduced heat
capacity kW
Gas pressure mbar
min. rated max.
Natural gas
(Methane) G20
triple ring
rapid
semirapid
auxiliary
128
115
97
72
3.30
3.00
1.75
1.00
314 l/h
286 l/h
167 l/h
95 l/h
1.30
0.75
0.48
0.33
17 20 25
LIQUID PETROLEUM
GAS
(cylinder) G30
triple ring
rapid
semirapid
auxiliary
93
85
65
50
3.30
3.00
1.75
1.00
240 g/h
218 g/h
127 g/h
73 g/h
1.30
0.75
0.48
0.33
20 28-30 35
LIQUID PETROLEUM
GAS
(cylinder) G31
triple ring
rapid
semirapid
auxiliary
93
85
65
50
3.30
3.00
1.75
1.00
236 g/h
214 g/h
125 g/h
71 g/h
1.30
0.75
0.48
0.33
25 37 45
Type of gas used Appliance model Total rated heat
capacity kW
Total rated
consumption
Air required
for burning
m
3
/h
G20 20 mbar 5 burners 10.80 1029 l/h 21.6
G30 28-30 mbar 5 burners 10.80 789 g/h 21.6
G31 37 mbar 5 burners 10.80 771 g/h 21.6