User's Manual

Document name: ICC-A-1 connectivity module description Revision: 0.1

Document ID: SCDOC-129-680 Revision date: 2017-04-24

FCC ID: FHO-ICC-A-1

IC ID: 10912A-ICCA1

2.3 Grounding of metal heat sink

When using opening A in the solder mask of the Poly PCB as shown in Figure 7, the

antenna connection shall be as short and close to antenna feed as possible.

Figure 7 - Suggested grounding point

If integrated in LED bulbs, when inserted into an opening the module PCB shall be

grounded to the heatsink plate as shown in Figure 8.