Quick Start Guide Rayden Rayden LED Lights RB5 RB10 RW5 RW10 What’s Included 1 x Light Fixture 1 x Yoke Mount 1 x Neutral Density Filter 1 x Power Supply with Cable www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.
Getting to know your Rayden Lights PRECAUTIONS • • • • • • • Keep the fixture away from water and all flammable gases or liquids. Use ONLY the recommended batteries. Handle the unit with care. DO NOT attempt to disassemble or repair the unit without first contacting the service department at www.ikancorp.com Keep the unit clean and free of dust. The unit can be cleaned with a soft, dry cloth. Use ONLY parts provided by the manufacturer. Always use caution when plugging in the fixture.
Changing the Pro Battery Plate Adding or removing the pro battery plate on the back of your fixture can be easily achieved. NOTE: The fixture comes pre-installed with the Gold-Mount battery plate. The process starts with the removal of the four screws on the four corners of the plate. Once the screws are removed, separate the plate from the back of the fixture. Unplug the 2-pin connector from the fixture. Store the screws and the Gold-Mount in a safe place. Reattaching the V-Mount plate is a simple process.
RB5 Rayden Bi-Color Half x 1 Studio & Field LED Light Specifications Fixture Specifications Electrical Specifications Light Source 608 0.06 watt LEDs Head Type Bi-Color 5600K-3200K Lens Beam Angle Power Supply Input: 110-220VAC Output: 15VDC @ 4.0A 45 Degree Fixture Power Consumption 36.
RB10 Rayden Bi-Color 1 x 1 Studio & Field LED Light Specifications Fixture Specifications Electrical Specifications Light Source 1184 0.06 watt LEDs Power Supply Input: 110-220VAC Output: 15VDC @ 6.
RW5 Rayden Daylight Half x 1 Studio & Field LED Light Specifications Fixture Specifications Electrical Specifications Light Source 608 0.06 watt LEDs Head Type Daylight 5600K Lens Beam Angle Power Supply Input: 110-220VAC Output: 15VDC @ 4.0A 45 Degree Fixture Power Consumption 36.
RW10 Rayden Daylight LED 1 x 1 Light Specifications Fixture Specifications Electrical Specifications Light Source 1184 0.06 watt LEDs Power Supply Input: 110-220VAC Output: 15VDC @ 6.
Learn More More dynamic information at official website: www.ikancorp.com Support Contact email: support@ikancorp.com CONDITIONS OF WARRANTY SERVICE • • Free service for one year from the day of purchase if the problem is caused by manufacturing errors. The components and maintenance service fee will be charged if the warranty period is expired. Free Service will not be Provided in the Following Situations:(*Even if the product is still within the warranty period.
