Quick start Guide

Function Set Up 1-4
Guides
Crosshair
Peaking
Underscan
DSLR Scaling
Zooming
EVF Mode
Pixel-to-Pixel
Check Field
HV Delay
Grids
False Color
Audio Wave
Clip Guides
Histogram
5DII Rec.
Firmware Version
Information
Update (USB)
Displays a crosshair on the center of the screen.
The DH5e is equipped with Monochrome Peaking features, which highlight the desired focus
area in a bright, red outline. The operator adjusts the focus control until the red indicator
outlines on the desired area are razor sharp, indicating optimal focus. For best results, be sure
object is properly exposed.
The DSLR Scaling function will allow users to extend their DSLR camera’s HDMI Video
Output any option of four; Normal 3:2, 16:9, or Full Screen. Convenience Made simple.
The 1:1 pixel-to-pixel mapping allows you to emphasize on individual chosen elements in
the shot. This feature is essential for ensuring that you are in focus.
This feature allows you to enlarge the image up to 3x.
Used with EVF Accessory. SOLD SEPARATELY.
Toggles between the Blue only, Red only, Green only, & Mono Modes.
This is to help calibrate the image.
This function displays the blanking portion of the incoming signal.
Activates grid on screen to assist with framing.
This feature utilizes a full spectrum of assigned color indicators, ensuring flawless shot
exposure. Under/Over luminance warnings enable the user to get the desired quality every
time.
Displays Audio Stereo Levels.
The DH5e offers adjustable upper Clip Guide levels to accurately display overexposed images
in any shooting condition. The operator simply assigns the upper IRE to their preference and
any exposure over the set IRE limit will flash in a vivid purple, indicating only the over exposed
area.
A graphical representation of the pixels exposed in your image. The left side of the graph
represents the blacks or shadows, the right side represents the highlights or bright areas and
the middle section is mid-tones. How high the peaks reach represent the number of pixels in
that particular tone. This tool helps you get proper exposure.
Displays currently installed firmware.
Used to update firmware when a USB containing update file is inserted.
NOTE:
To see further options for
an active function, hold the
function key for 2 seconds
until option mode appears.
Function Set Up
www.ikancorp.com | 1.713.272.8822 | [e-mail] because we’re filmmakers too