User Manual

▲
Features
4 2016 Beholder ® All Right Reserved
Beholder EC1 features
Dimensions: 360 x 184 x 79 mm
Compatibility: Mirrorless & DSLR Cameras up to 4.5 lbs
Main Features:
• 32-bit controller with motor control units (MCUs) and 12bit Encoder system
• OLED screen display for power and battery level
• OLED screen display for Profile Mode and joystick
• 3-axis gimbal stabilizer and 4-axis toolless design
• 3-axis 360° Pitch, Roll, Pan (no limitation)
• Quick-release plate compatible with Manfrotto 577
• 4-way joystick to control the pitch and roll angle
• 3x 3.7v mAh Detachable Rechargeable batteries
• Battery with an operation time of up to 20 hours
• One 3/8" screw hole in the handle bottom and two 1/4" hole on the side for mounting accessories like
a monitor or microphone
• Increase the precision of stabilization by applying FOC-specific compensations
• Five pre-configured profiles including Follow, Pitch Lock, Full Lock, Follow Roll, and Home position
• Prevents motors from losing synchronization and skipping steps
• Auto-Invert-Mode (all profiles can also be used in this condition)
• Bluetooth module for remote control (not included)
• 2.4g wireless joystick module for remote control (not included)
• Supported temperature accelerometer calibration
• Adaptive PID-algorithm for preventing vibrations in wide angles
• ACC low-pass filter to improve stability
• Provides information about frame angle and angle of the camera relative to the frame
• Five user-configurable modes of operation with a toggle button
• Option to adjust camera position with hands
• Low voltage protection for integrated battery
• Can significantly decrease power consumption by using field-oriented control strategy to drive motors
• Sound alerts for mode change and calibration
• Increases instant torque