User Manual

▲

Modes of Operation (Profiles)

Switching the gimbal to different modes of operation (profiles)

•

Press the mode button one time, which is located under the OLED screen (Fig. 9 [3]) to enter Lock

Mode (Profile 1): camera will hold the direction and not follow, pan, or tilt.

•

Press the mode button twice to enter Pan-Follow Mode (Profile 2): gimbal follows pan and holds the

tilt position.

•

Press the mode button three times to enter Follow Mode (Profile 3): camera follows the tilt and pan

directions.

•

Press the mode button four times to enter Full Follow Mode (Profile 4). The gimbal will follow, roll, pitch,

and pan.

•

Press the mode button five times in a row to get to Profile 5: level roll and bring the pitch to the horizon.

•

Press the mode button and hold for six seconds to calibrate the gyro.

Fig. 10. Manual setting on the roll angle

TIP

Any of the profiles can be set to hold a specific angle or position manually. Take the camera with

one hand and hold it in the

desired position for 2 seconds. The system will automatically save

the desired angle (Fig. 10).