User Manual

▲

Power ON

Starting the gimbal in default profile

•

Press the power button for two solid seconds to power the gimbal on (Fig. 9 [2]).

•

The gimbal will start in pan follow mode. (Profile 2)

•

Use the 5-way joystick (Fig. 9 [1]) to control the camera tilt and pan direction. Push the joystick up or

down for tilting up and down. Push the joystick to the left or to the right to pan the camera left or right.

[Mode button]

Fig. 9. Gimbal joystick

TIP

Make sure the batteries are fully charged before starting the gimbal.

Adjust the gimbal and camera position before use. Beholder EC1 uses the latest 32-bit

encoding technology and can start up in any direction and at any angle.

[joystick]

[Power Switch]