Quick start Guide

www.ikancorp.com | 1.713.272.8822 | [e-mail] because we’re filmmakers too
Configuration of Setting Menus
Assistant
Single Color – Toggle between mono colors: gray, red, green, blue
False Color – This feature utilizes a full spectrum of assigned color indicators to show overall brightness of the image. This helps achiever perfect
exposure.
Peaking – The monitor is equipped with a color peaking feature which highlights the desired focus area in a bright color. The operator adjusts the focus
until the subject is surrounded with the color outline.
Peaking Color – Adjust the color of peaking: red, green, blue.
Zebra – The monitor will display slanted lines where the image is overexposed or underexposed.
Histogram – Graphical representation of the tonal values of your image.
Audio Meters – Allows the operator to monitor audio channels.
Guides
Crosshair – Display a crosshair on the center of the screen.
Safety Guides – Safety border between the following: 80%, 85%, 90%, 93%, 96%
Aspect Guides – Toggle border between 4:3, 2.35:1, 1.85:1
Guide Color – Change the color of guide: white, black, red, green, blue
Video Configuration
Aspect Ratio – Toggle between Auto, 16:10, 16:9, 4:3, 1.85:1, 2.35:1
Scan Mode – Toggle between Under or OverScan
Pixel to Pixel – 1:1 pixel to pixel mapping
Zoom – Allows operator to zoom into the image
Flip-H – Flips the image horizontally
Flip-V – Flips the image vertically
Image Freeze – Freezes the image
Noise Reduction – Assist in reducing the noise in the monitor
Color Settings
Brightness – 0-100
Contrast – 0-100
Saturation – 0-100
Hue – 0-100
Sharpness – 0-100
Backlight – 0-100
Color Temp – 5600K, 6500K, 9300K, User (Custom)
Function Setup
Option to map the Up, Down, Left, Right, F1, F2, and F3 key for quick access to features.
System Configuration
Language – English, Chinese
Guide Masks – Off, Low, Middle, High
Osd Duration – Off, 5S, 10S, 15S
Vlume – 0-100
Reset – reset to factory settings
Update – used to update the monitor’s firmware