Quick start Guide

www.ikancorp.com | 1.713.272.8822 | [e-mail] because we’re filmmakers too
Installation of the X-Holder with ball mount
The X-holder should be loose before inserting the struts into the hook & loop corners.
1. Place the struts into the hook & loop flaps at the corners of the panel.
2. Place them in opposite of each other for them to stay in place.
3. Tighten the tension knob at the center to keep the struts locked in place.
Color temperatures for today’s film and TV production are 5600K (daylight) and 3200K (tungsten). Ikan developed the CB8 Bendable Light to handle both
these temperatures. With patented technologies, the CB8 offers a professional and customizable LED light source. In addition, the light features cooling
flex system for optimizing heat dissipation. Specifically, the CB8 offers the following features:
1. The 0-100% brightness incremental adjustment of the 2800K-6500K temperature enable fine-tuning your color range.
2. A panel of 336 Bi-color led light gives out 200FC of light.
3. Ultra-low noise and active cooling technology contribute to excellent thermal stability.
4. The bright LCD readout is easy to view, enabling smooth adjustment of functions.
5. Digitally adjustable knob allows you to adjust menu settings quickly and accurately.
6. AC/DC power control box allows the light to be powered by battery or DC power supply.
7. The softbox with grid cloth and 60 degree egg crate is included with the light.
When placing the light mount on the 5/8” baby pin, this allows you to adjust the light in any desirable position.
Note: To avoid damage to the LED’s, place the panel light LED side down on soft material.