Manual

 41
032010
dT
RS 232
R
V10.4003
P
ump control
R
V10.5001
R
V10.4001/2
R
V10.4003 Valve
Fig. 20
Schematic view of connections (rear view)
 Insert the valve connector cable (RV 10.5001 or RV 10.4001/2 resp. RV 10.4003 Valve) resp. the network cable (RV 10.4003 pump control) ) into the
appropriate socket (fig. 20).
 Connect the pressure sensor to the Woulff bottle and the Woulff
bottle to the vacuum connector on the condenser using the va-
cuum hoses supplied. Please note that the vacuum must always
be connected to the highest connection point on the condenser
(fig. 21).
Fig. 21