Manual
37
032010
Removing the condenser
Use the ring spanner provided to loosen union nuts that are tightly
fitted.
Loosen the union nut by turning anticlockwise.
Description of special condensers
•
RV 10.3 Vertical-intensive condenser with manifold
This vertical-intensive condenser features a double jacket design
for particularly efficient condensation.
Also available with coating (RV 10.30)
•
RV 10.4 Dry ice condenser
Dry ice condenser for distilling low-boiling solvents.
Cooling by dry ice, no cooling water required. Maximum conden-
sation thanks to low temperatures.
Also available with coating (RV 10.40)
If a dry ice condenser is used, then the flow rate control system
must be switched of in menu “Distillation”, menu option “Flow
rate control”; see also “Commissioning” section.
•
RV 10.5 Vertical-condenser with manifold and cut-off valve for
reflux distillation
Also available with coating (RV 10.50)
•
RV 10.6 Vertical-intensive condenser with manifold and cut-
off valve for reflux distillation
This vertical-intensive action condenser features a double jacket
design for particularly efficient reflux distillation.
Also available with coating (RV 10.60)
Fig.13
4
7
8
6
12
9
3
10
5
13
15
16
R
otary head
Glassware
R
V 10.2 diagonal
RV 10.20 diagonal, coated
Glassware
R
V 10.1 vertical
RV 10.10 vertical, coated
Rotary head
2
1
0
0
0
m
l
N
S
2
9
/
3
2
1
11
13
12
5
4
7
8
6
15
9
3
2
10
1
6
1
1
1
1
0
0
0
m
l
N
S
2
9
/
3
2
Mounting the glassware
Item Designation Quantity Quantity
diagonal glassware vertical Glassware
1 Receiving flask 11
2 Clamp NS 29 (stainless steel) 11
3 Steam pipe 11
4 Stopcock 11
5 Pipe tube 11
6 Condenser 1 Diagonal condenser 1 Vertical condenser
7 Connection 1 Introduction sleeve 1 Vacuum connection
8 Clamp NS 29 (plastic) 11
9 Seal RV 06.13/ RV 06.15 11
10 Evaporator piston 1000 ml 11
11 Ball joint clamp RV 05.10 11
12 Screw joint cap 44
13 Hose connection 44
15 Locking nut 11
16 Spring ring 11