User guide

- 134 -
0HWURKP'RVLPDW
Dosing device for pulse-free dispensing and exact pipetting.
2SHUDWLRQLQWKUHHGLIIHUHQWPRGHV
'26: Dosing
Dosimat is dosing as long as line ’Start Dosing’ is activated, e.g. by a ’push-button’.

',6&
: Dispensing, cumulative
Dosimat is dosing a stored dispensing volume. The dispensed volume remains displayed
and is cumulated during following dosing steps.
',65: Dispensing, repetitive
Dosimat is dosing a stored dispensing volume. The burette cylinder is refilled and the display
is reset to 0.000 mL.
&RQWURO
9ROXPH>P/@
(not in Mode DOS)
The dosing volume can be set from 0.001 mL to 999.999 mL.
'RVLQJUDWH>P/PLQ@
The dosing rate can be set depending on the volume of exchange unit:
1 mL: 0.001 to 3.0 mL/min
5 mL: 0.005 to 15.0 mL/min
10 mL: 0.010 to 30.0 mL/min
20 mL: 0.020 to 60.0 mL/min
50 mL: 0.050 to 150.0 mL/min
)LOOLQJUDWH>P/PLQ@
The filling rate of the exchange unit can be set according to the dosing rate.
6WDUWGRVLQJ
In modes DIS C and DIS R dosing of preset volume is started when this line is activated. In
mode DOS the dosing continues as long this line is activated.
6WDUWILOOLQJ
When this line is activated, the cylinder is refilled and the display is set to 0.000 mL. Running
dosing tasks are stopped before.

0HD VXUHGYDOXHV

9ROXPH>P/@
The volume, which has been dispensed, is given on this line.