User guide
- 112 -
,.$:HUNH.+6
The KHS makes it possible to operate the fexIKA (solid-fluid serial extractor) not only as a unit with
fixed cycles, but also as a cooling (KHS1) and heating ( RET control visc ) control combination.
Thus user-specific control of heating and/or cooling cycles operations is possible since both devices
can be controlled independently of each other.
The corresponding input and output paths are marked by means of digit fields.
&RQWURO
1. Input path for solenoid valve ON/OFF.
0HDVXUHGYDOXHV
The device does not make any measured values available.
127(
Detailed information on the instrument features may be found in the separate operating manual.
For proper communication the transmission parameters of the unit serial interface have to be set to
the following values:
1RVSHFLDOVHWWLQJVDUHUHTXLUHGIRUWKLVGHYLFH