Manual

17
The media used in the appliance may result in danger spe-
cific to the media and the process. This applies, for exam-
ple, to shaking cultures with living cells and to aggressive
or flammable media.
Particulars as small estimated endan-
germents can become, if they arise with one another in
combination, a larger endangerment. This manual cannot
describe the dangers and resulting safety measures in
more detail.
This appliance should only be operated by suitably trained per-
sonnel familiar with the appliance and authorized to work in this
area.
• The machine may only be opened by trained specialists - even
during repairs. The machine is to be unplugged from the mains
before opening. Live parts inside the machine may still be live
for some time after unplugging from the mains.
• NOTE ! Covering or parts that are capable of being removed
from the unit without accessory equipment have to be reatta-
ched to the unit for safe operation in order to prevent, for
example, the ingress of fluids, foreign matter, etc. .
• Wear your personal protective equipment in accordance with
the hazard category of the medium to be processed.
Otherwise there is a risk of:
- splashing liquids
- projectile parts
- body parts, hair, clothing and jewellery getting caught.
•Follow the safety instructions, guidelines, occupational health
and safety and accident prevention regulations.
• Beware of the high dead weight of the appliance when trans-
porting. Ensure that your fingers do not get crushed when set-
ting down the appliance.
• Always install the appliance on a flat, stable non-slip base.
• Pay attention to the vessels on the shaking table when setting
the shaking rate. This will prevent any of the medium to be
shaken from spurting out of the sample vessels.
Page
Warranty 2
Safety instructions 17
Correct use 19
Unpacking 19
Commissioning 19
Switch on 19
Setting the safety limit values 20
Opreator panel and display 20
Function Shaking 21
Timer 21
Function Heating 21
Operating modes 22
Setting the operating mode 22
External temperature sensor 22
Kalibration - temperature 22
Reset 23
Appliance variant KS 4000 ic control 23
Attachments 24
Error codes 24
Interface and outputs 27
Maintenance and cleaning 28
Accessories 30
Technical data 30
• Read the operating instructions in full before starting up
and follow the safety instructions.
Kep the operating instructions in a place where they can be
accessed by everyone.
KS 4000 i 1011
Contents
Safety instructions
EN